FAQ: Your Questions Answered
FAQ: Your Questions Answered
FAQ - Your questions and my answers to common skincare issues!
LATEST POST - See other posts below!
This post contains links to products I recommend and any purchase from these links may result in a payment to me - thank you!
FAQ from real customers
Hi Karen!
I'm interested in the Tonisure/Raysure set. I already use the Nira laser (daily) and the Ziip micro current (4xweek), and the Time Master pro (2xweek).
Using all of those devices I still have some sag in the jowls and neck. Would these devices help? Is there a protocol to add these two to my current routine? How much time do the treatments take and how many times per week is recommended? Are these two devices ok to use alongside my current devices? Do these devices need a conductive gel to use?
Thanks for your help!!
Lisa
Hello Lisa!
I am happy to answer to answer your questions!
The TONISURE is a dual-feature device with both plasma and galvanic. This is for tightening and delivering plasma to the skin (collagen production). The plasma feature is used on clean, dry skin.
After the plasma treatment, you would apply serum and do a galvanic treatment. Galvanic helps to drive the product deeper into the skin. You do these (plasma/galvanic) in one treatment session.
The RAYSURE is a laser shaper device and designed to help tighten and reduce small fatty deposits, which helps to firm and reduce double chin, puffy jowls, etc. This is done on clean, dry skin.
They can be sued on separate days. I would alternate them and not use them on the same day. You could use a microcurrent device prior to your plasma/galvanic and after your laser treatment. Since microcurrent requires conductive gel, just be sure to always remove it before doing the plasma or laser.
You could use your TMP the same way.
I don’t like to do more than two types of treatment in the same day. You skin and facial muscles need the time to rest and be allowed to do what the device intends and doing too much is counter-productive. You could do laser on lower face and then do the TMP / microcurrent on mid to upper face. As long as you are not doing the same area over and over with devices.
Just be sure to use the right device for the area:
Laser – tighten / reduce fatty deposit (don’t use on temples or cheeks where you want to keep volume)
Plasma – full face, neck
Galvanic – full face, neck _ can be used after almost any other treatment with a serum
Microcurrent/TMP – use on alternate days or in other areas of face where you don’t use the laser
Hope that helps!
Karen
NOTE: You should use these consistently for best results! The TONISURE plasma device has a 4 to 1 ration of uses vs. a pro-level cold plasma in-office treatment: Use TONISURE 4 times to equal the results of an in-office treatment. Similar results would with laser, although, I’m inclined to day it would be more like 4-6 treatments as home lasers on nowhere near the intensity of professional laser, due to safety factors.
BEST PROTOCOL: DEEP ETCHED LINE & WRINKLES
I had a customer reach out to me who had tried various products, but still wasn’t seeing results. She outline her regimen and it looked good, but obviously wasn’t giving her the results she wanted.
I asked her for a photo, which she promptly sent.
This was incredibly helpful as I could see some of the products she had used were not the best fit and I could recommend a very specific protocol for her that I feel would get better results:
ISSUE: DEEP LINES and WRINKLES / DISCOLORATION
MY RESPONSE:
Hi Julie:
Thanks for the photo - it is helpful!
I would suggest these things that I know would help you see results. It appears that you are in need of a good option for reducing the lines and helping to plump out the wrinkles. However, I think one of the best tools that will help you see results is going to be a microneedle pen (not a roller, a pen). I have seen really good results by using a good microneedle pen monthly.
My favorite is this one https://amzn.to/3wbDbPz - I use it and recommend it highly!
Use the 16 needle and do a good treatment at .50 once monthly and then after 90 days, you can switch to a 36 needle and do it weekly.
The 16 needle is going to be better for deeper lines. It is a bit more intense but it really helps.
The 36 needle is better used weekly for product penetration and less intense.
That set also comes with nano needles - I have a post on how to do a hydra facial with those (great intense moisture treatment): https://agelessbeautypro.com/blog/diy-hydra-facial-maximum-moisture-infusion-facial
HOW TO PROTOCOL:
Do the microneedle treatment on VERY CLEAN SKIN. Do not apply any serums. Do a light alcohol wipe over the skin right before treatment.
Use microneedle: Go around face/neck/check in small circles or "tic tac toe" signs. DO not use anything with the microneedle or right after!
>> IMPORTANT: Wait at least 30 minutes before you apply NEOGENESIS RECOVERY, then use only Recovery and barrier cream the entire next day. This is the BEST serum to use at this time and will really help your skin but using it only without the microneedle is not going to be as impactful.
Do this ONCE MONTHLY ONLY - every 30 days; not more often. This gives your skin time to regenerate collagen.
Start using the CAVIPLLA serum + H2 mist and use every other night. This is EXCELLENT for helping to reduce lines and plump out wrinkles.
Continue to use your TMP as you are.
If you have a red light tool - use it at least 3x weekly! This takes a while to see results, but it is worth it as a collagen booster!
These are my very best options for you right now. After 3 months, you can check back and we can see where you are!
Hope that helps. I am anxious to see your results! I've had great results with this particular regimen, as long as you are consistent!
Karen
FAQ: Customers Asked and Answered
-
![]()
TIME MASTER PRO vs. MICROCURRENT : DOES IT ZAP?
QUESTIONS RE: TIME MASTER PRO vs. MICROCURRENT
Q:
Karen,
So I’m interested in TMP and here’s my questions:
1) TMP is based on Ultrasound technology does it cause a “zap” feeling?
2) Since I have both Clarablend and NuFace Trinity does the TMP feel totally different than microcurrent? Is TMP move like a vibration? For example, is TMP like a Clarisonic Mia SMART? Probably not a good comparison.
3) TMP technology is ultrasound but the device still uses electro muscle stimulation? But that electro muscle stimulation is not microcurrent?
A:
Hi:
I’m more than happy to answer all your questions!
The TMP is very different from microcurrent. It does not cause any “zaps” like microcurrent can (which it should not if you are using proper conductive gel and mist). I have been zapped pretty badly by the Nuface when it touches an area, like my nose, that has no gel. The Clareblend has not zapped me ever -? Sometimes if you use too much gel it can be counter-productive and cause zaps!
The TMP feels very different from microcurrent. It has a sort of gentle massage and cupping feel. It kind of feels like it’s gently “sucking” your face. Sounds odd, but it feels nice. This is what causes the immediate plumping and smoothing effect. The deeper effect of the ultrasound and LED are what help build collagen and more long-term results. There is not really a vibration, but you do feel it working.
Ultrasound and microcurrent are different technologies and do different things – Ultrasound works to revitalize your skin, cellular layer as well as provide the immediate effect. It works a little muscle and a little skin (both surface and under layers). The Microcurrent really does not do much for skin; it is designed for sculpting/toning/lifting muscles that are lagging/drooping. It doesn’t really help wrinkles, skin tone or smoothing.
Since they are different, I like to use both back-to-back. Optional, but I like the plumping and brightening/LED effect for the TMP and the lifting and toning of the microcurrent. It is a “full mini face lift” (subtle) but pretty effective for an at-home treatment.
Hopefully I’ve answered this for you. I know it’s a splurge device and I want to be sure you feel comfortable with what it does so you know what to expect!
Karen
-
![]()
HOW TO USE SCULPLLA PRODUCTS: LAYERING
Q:
Can you tell me the correct way to layer cavi, the mist and the repair cream? The repair cream recommends combining all three products?
I have enjoyed following you for quite sometime and look forward to your posts.
Thank you.
Lynne
A:
Hi Lynne:
Thanks for following me! I am happy to help you:
The best way to use these is to use
1. H2 Mist
2. Caviplla Serum
3. Promoter Repair Cell Cream
You can use the mist and cream alone or the mist and Cavi alone.
Always mist first, apply Cavi (let it foam/oxygenate) and then, if desired, apply the cream.
This will give you the best boost of PLLA and results!
Take care,
Karen
-
![]()
SCULPLLA, DEVICES OVER FILLER: OK?
Q:
I just had Botox and filler in a few places on my face. How long do I have to wait to do either microcurrent or TMP? Also I did not have anything to my cheeks. Do you think I can still work on them or will the current spread? Also do you have any thoughts about when I can do light lymph drainage massage. or facial exercises. What about products. Can I use my Sculplla foam?
Thanks.
Laura
A:
HI Laura:
Yes, you can use your products, Sculplla included, over filler.
You should wait at least 2 weeks to use any devices over filler. I like to wait longer, at least 4 weeks.
Work around the areas with filler when using your device or doing any facial massage until about 4 weeks. After that you will be fine, but I always think it's best to avoid filler areas until the filler is at least at its half-life.
Hope that helps!
Karen
Make it stand out.
It all begins with an idea. Maybe you want to launch a business. Maybe you want to turn a hobby into something more. Or maybe you have a creative project to share with the world. Whatever it is, the way you tell your story online can make all the difference.
